XPS50P50

This is the wiki page for CPS model XPS50P50.

Connector pinouts

Monitor (J1)

This connector provides access to metering output signals and the safety interlock input signal.

Pin	Name	Function	Usage
1	RETURN	Signal ground	Ground reference for meter outputs (kV MON, mA MON).
2	kV MON	HV meter (out)	0 to +10 V = 0 to +50 kV out
3	mA MON	Beam meter (out)	0 to +10 V = 0 to 1 mA out
4	INTLK	Safety interlock (in)	Short to pin 1 to enable HV output; leave open to disable HV output

Wiring diagrams

Wiring diagrams showing local vs. remote control of model XPS50P50

Model XPS50P50 can either be controlled locally, by adjusting its internal trimpots, or remotely by connecting it to external programming voltages. In both cases, the output voltage and beam current may be externally monitored by connection meters (or digital-to-analog converters) to J1 pins 2 and 3.