Shopping cart
MODEL BP2595
FEATURES

Bipolar HV power supply, USB: ±50 kVDC @ 500μA

  • Wide, bipolar voltage range: -50 kV to +50 kV
  • Very low ripple
  • Front panel displays setpoint, status and meters
  • Local control via front panel
  • Remote control via USB
  • Thread-safe API supports event-driven apps
DESCRIPTION

CPS Model BP2595 is a two-quadrant HV power supply with -50 to +50 kV output range. It is housed in a standard 19-inch rack-mount module, with USB and HV output connectors on the front and 120/220 VAC input on the rear. The module may be controlled from its front panel or via USB.

Polarity switching

Two independent 50 kV generators (one positive, one negative) are used to provide optimal performance over the full bipolar output voltage range. A proprietary HV relay selects the appropriate generator and routes it to the module's HV output connector. When the target polarity is changed, the module automatically disables the HV generators and, when the output has discharged (< 200 V), toggles the relay and re-enables the generators. The total polarity switching time is proportional to the output discharge time — when fully discharged, the output polarity will change in less than 500 ms.

Control modes

A front panel switch allows selection of Local or Remote control mode. In Local mode, the module is controlled from the front panel. In Remote mode, the module can be controlled by an external computer which is connected to the BP2595 with a USB cable. Meter data, setpoint and power supply status are always readable over USB, regardless of the selected control mode. A unique USB address can be assigned to every BP2595 via a rotary address switch, thus enabling a single computer to monitor and control up to eight BP2595 modules.

Software

CPS offers a powerful application program interface (API) for model BP2595. The API provides functions that enable a USB-connected computer to monitor and control all aspects of module operation. API functions are thread-safe to ensure reliable operation in multi-threaded applications. Event-driven applications are facilitated by the API's blocking functions, which allow programs to wait for meter updates and status/setpoint changes without polling.

SPECIFICATIONS
Input power
Voltage120 or 220 VAC (selectable).
Current400 mA max at no-load
700 mA max at 100μA load
2.5 A max at 500μA load.
Line regulation±0.02% (110VAC to 125 VAC)
HV output
Voltage−50 kVDC to +50 kVDC (programmable)
Current500 μA @ 50kV Absolute Max
Voltage rippleipple< 100mVp-p at full output voltage and 100μA load.
< 1Vp-p at full voltage and up to 500μA load.
Load regulation< 0.01% for load current change from 0 to 100μA at full voltage.
< 0.01% for load current change from 0 to 500μA at full voltage.
Long term stability< 50ppm per 1 hour.
Temperature coefficient< 50ppm/°C
General
Programming16 bit resolution for full output voltage via USB or potentiometer mounted on front panel
Output protectionShort circuit and arc protected.
Operating temperature0 to 50 °C
Internal fuse125V, 5A
Dimensions3U - 5.25 × 19.0 × 22.75-inch deep chassis
Metering
Output voltage16 bit resolution for full output voltage
Output current16 bit resolution for full output current

*Electrical specifications are met after a 1-hour warm-up time.

DOWNLOADS
Documentation
Data sheetModel BP2595 data sheet
Technical wikiWiki page for model BP2595
Software
SDKModel BP2595 software development kit
PRICES
Model Description Price Order Qty.
1 2–9
BP2595 Bipolar HV power supply, USB: ±50 kVDC @ 500μA $4,300 $3,870