|
ELECTRON MICROSCOPE SUPPLIES
In electron microscopy, output variation of any significant amplitude and frequency can damage results.
CPS' scanning electron microscope supplies feature low ripple and high stability, with between three and five outputs.
PRODUCTS Power Supplies | Model 130N — Single output high voltage power supply with case ground -
Single output 0 to 30 kV
- Uses only 500 μA at max voltage
- AC input
- Ripple under 200 mV at full load
- Arc- and short-proofed
- Local/remote programming
- HV output cable included
- Case ground
- Built-in metering
|  | Model 130NF/1314 — Single output high voltage power supply with floating ground -
Single output 0 to 30 kV
- Uses only 500 μA at max voltage
- AC input
- Ripple under 200 mV at full load
- Arc- and short-proofed
- Local/remote programming
- HV output cable included
- Floating grounding wire
|  | Model 1316 — Single output unipolar high voltage power supply -
Single output +0.01 to +20 kV or −0.01 to −20 kV
- Very low output ripple: under 200 mV peak-to-peak at full load and 30 kV at 1 mA (20 kV at 2 mA)
- Temperature coefficient under 15 ppm/°C
- Separate connections for HV output cable shield and programming reference
- Overvoltage and overcurrent protection
- Automatic output voltage recovery after arcs and short circuits
- AC input
- Local/remote programming and metering
- Positive or negative polarity
|  | Model 2600 — Single output, ultra low noise/stored energy high voltage power supply -
Single output 0 to +50 kV or 0 to −50 kV
- Only @ 500 μA at maximum voltage
- 24V to 28V DC input
- Input for remote interlock switch
- Input for remote HV enable
- Power for remote VOLTAGE ON display lamp
- Remote control via USB or RS-232 comm
- Free user interface control and display program
|  | Model 3601 — Triple output high voltage power supply -
Accelerator output +50 to +50 kV or −50 to −50 kV
- Output ripple under 100 mV at full load
- Temperature coefficient under 300 ppm/°C
- Stored energy under 1 J
- Low reflected ripple on input power line
- Rack-mountable
- Commonly used with electron probes and similar applications
|  | Model 3602 — Triple output high voltage power supply -
Three outputs: −30 kV 250 μA, floating −1 kV 25 μA and 5 VDC 5 A
- Compact enclosure
- Interlock input and status LEDs
- Federal Standard output connector
- RS-232 remote control
- Demo program with source code
- Ideal for electron microscopes and similar applications
|  | Model 3603 — Triple output high voltage power supply -
Three outputs: −30 kV 330 μA, floating −1 kV 25 μA and 5 VDC 3 A
- Compact enclosure
- Interlock input and status LEDs
- Federal Standard output connector
- RS-232 remote control
- Demo software with source code
- Ideal for electron microscopes and similar applications
|  | Model 3604 — Triple output high voltage power supply -
Accelerator output +50 to +50 kV or −50 to −50 kV
- Output ripple under 100 mV at full load
- Temperature coefficient under 300 ppm/°C
- Stored energy under 1 J
- Low reflected ripple on input power line
- Rack-mountable
- Commonly used with electron probes and similar applications
|  | Model 6001 — Double output high voltage power supply -
Very stable −30 kV electron beam supply
- Arc and short circuit protection
- 5 A integrated filament supply floating at beam potential
- Remote programming of beam voltage
- Beam voltage, beam current, and filament current readouts
- Optimized for SEM and X-ray tube applications
|  | Model 6004 — Double output high voltage power supply -
Very stable −30 kV electron beam supply
- Arc and short circuit protection
- 5 A integrated filament supply floating at beam potential
- Remote programming of beam voltage
- Beam voltage, beam current, and filament current readouts
- Optimized for SEM and X-ray tube applications
|  | | | Help | I didn't find what I need Call us and let our knowledgeable staff help you find exactly what you need. Need a custom solution? You've come to the right place! CPS has been designing and manufacturing custom high voltage equipment for 30+ years. | 
Tell us what you need |
|
