Model 2591 — Single output high voltage power supply

• Single output +0.01 to +30 kV
• Output ripple under 200 mV p–p at 500 μA
• Temperature coefficient under 25 ppm/°C
• Stored energy under 1 J
• Low reflected ripple on input power line
• Separate connections for HV output, cable shield, and programming reference
• Compact enclosure: 6.0 × 2.1 × 3.7 in.
• Commonly used in focused ion beam systems

Model 2593 — Single output high voltage power supply

• Single output 0 to +15 kV or 0 to −15 kV
• Output ripple under 200 mV peak-to-peak
• Temperature coefficient under 50 ppm/°C
• Stored energy under 0.1 J at 15 kV
• Low reflected ripple on input power line
• Compact case size
• Overvoltage and overcurrent limited
• Short-circuit and arc protected
• Automatic output voltage recovery following arcs and short circuits
• Common applications include electron beam, ion beam, and X-ray generators

Model 2594-10 — Single output unipolar high voltage power supply

• 10 kV anode output
• Low ripple
• Low temperature coefficient
• Low stored energy
• Wide output voltage range
• Excellent stability
• Separate ground for case, signal, and power
• Common applications include ion beam generation

Model XPS50P50 — X-ray power supply, anode + filament

• Anode voltage +2 kV to +50 kV
• Integrated anode and filament power supplies
• Programmable anode voltage and beam current
• High stability beam control
• Local and remote control modes
• Safety interlock input
• Meter outputs for beam current and HV
• Overvoltage, arc and short circuit protection

Model 2596 — Quad unipolar output precision high voltage power supply

• Up to 30 kV positive or negative outputs
• Up to 200 μA (200–1000 μA options available upon request)
• Output noise and ripple under 200 mV p–p at full load for each output
• Independent programming, voltage, and current metering
• Output voltage stability under 10 ppm/hr
• Temperature coefficient under 10 ppm/°C
• Excellent load and line regulation (0.001%)
• Outstanding slew rate (over 35 V/ms) without voltage overshoots
• Standard 19″ rack enclosure
• Shielded high voltage CPS output connectors
• Arc and short protected, overcurrent and overvoltage limited
• AC line voltage input

Model 5003 — Unipolar (positive or negative) high voltage power supply

• Single output 0 to +2 kV or 0 to −2 kV
• Low output ripple
• Arc and short circuit proof
• Positive or negative output
• Internal and external programming
• Output voltage metering
• DC or AC line input models
• Ideal for photomultiplier tubes

I didn't find what I need

Call us and let our knowledgeable staff help you find exactly what you need.

Need a custom solution? You've come to the right place! CPS has been designing and manufacturing custom high voltage equipment for 30+ years.