Model XPS50P50 — X-ray power supply, anode + filament

• Anode voltage +2 kV to +50 kV
• Integrated anode and filament power supplies
• Programmable anode voltage and beam current
• High stability beam control
• Local and remote control modes
• Safety interlock input
• Meter outputs for beam current and HV
• Overvoltage, arc and short circuit protection

Model 1316 — Single output unipolar high voltage power supply

• Single output +0.01 to +20 kV or −0.01 to −20 kV
• Very low output ripple: under 200 mV peak-to-peak at full load and 30 kV at 1 mA (20 kV at 2 mA)
• Temperature coefficient under 15 ppm/°C
• Separate connections for HV output cable shield and programming reference
• Overvoltage and overcurrent protection
• Automatic output voltage recovery after arcs and short circuits
• AC input
• Local/remote programming and metering
• Positive or negative polarity

Model 1487 — Triple output high voltage power supply

• Triple outputs (15.3 kV anode, 5.3 kV focus and 500 V grid)
• All outputs adjustable
• Low line and load regulation of high voltage outputs
• All outputs short circuit and arc protected
• Remotely programmed shutdown for each output
• All outputs current limited
• Compact size: 6 × 4 × 4 inches
• DB-9 I/O connector

Model 1617 — Triple output high voltage power supply

• Three output voltages: 20 kV anode, 5 kV focus, and 300 V grid
• Low output ripple
• Tight line and load regulation

Model 1733 — Triple output high voltage power supply

• Three outputs: 16 kV anode, −105 V G1, and 400 V G2
• 22 V to 24 V input
• Built to MIL-I-45208 standards

Model 2593 — Single output high voltage power supply

• Single output 0 to +15 kV or 0 to −15 kV
• Output ripple under 200 mV peak-to-peak
• Temperature coefficient under 50 ppm/°C
• Stored energy under 0.1 J at 15 kV
• Low reflected ripple on input power line
• Compact case size
• Overvoltage and overcurrent limited
• Short-circuit and arc protected
• Automatic output voltage recovery following arcs and short circuits
• Common applications include electron beam, ion beam, and X-ray generators

I didn't find what I need

Call us and let our knowledgeable staff help you find exactly what you need.

Need a custom solution? You've come to the right place! CPS has been designing and manufacturing custom high voltage equipment for 30+ years.