Model BP2592 — Single output programmable bipolar high voltage power supply

• Wide, bipolar voltage range: -30 kV to +30 kV
• Output voltage polarity reversible on the fly
• No arcing when cable unplugged from unit
• Output voltage softened by resistors
• Voltage programming via front panel mounted potentiometer
• Voltage metering via front panel digital display

Model 1316 — Single output unipolar high voltage power supply

• Single output +0.01 to +20 kV or −0.01 to −20 kV
• Very low output ripple: under 200 mV peak-to-peak at full load and 30 kV at 1 mA (20 kV at 2 mA)
• Temperature coefficient under 15 ppm/°C
• Separate connections for HV output cable shield and programming reference
• Overvoltage and overcurrent protection
• Automatic output voltage recovery after arcs and short circuits
• AC input
• Local/remote programming and metering
• Positive or negative polarity

Model 2596 — Quad unipolar output precision high voltage power supply

• Up to 30 kV positive or negative outputs
• Up to 200 μA (200–1000 μA options available upon request)
• Output noise and ripple under 200 mV p–p at full load for each output
• Independent programming, voltage, and current metering
• Output voltage stability under 10 ppm/hr
• Temperature coefficient under 10 ppm/°C
• Excellent load and line regulation (0.001%)
• Outstanding slew rate (over 35 V/ms) without voltage overshoots
• Standard 19″ rack enclosure
• Shielded high voltage CPS output connectors
• Arc and short protected, overcurrent and overvoltage limited
• AC line voltage input

Model 3601 — Triple output high voltage power supply

• Accelerator output +50 to +50 kV or −50 to −50 kV
• Output ripple under 100 mV at full load
• Temperature coefficient under 300 ppm/°C
• Stored energy under 1 J
• Low reflected ripple on input power line
• Rack-mountable
• Commonly used with electron probes and similar applications

Model 3602 — Triple output high voltage power supply

• Three outputs: −30 kV 250 μA, floating −1 kV 25 μA and 5 VDC 5 A
• Compact enclosure
• Interlock input and status LEDs
• Federal Standard output connector
• RS-232 remote control
• Demo program with source code
• Ideal for electron microscopes and similar applications

Model 3604 — Triple output high voltage power supply

• Accelerator output +50 to +50 kV or −50 to −50 kV
• Output ripple under 100 mV at full load
• Temperature coefficient under 300 ppm/°C
• Stored energy under 1 J
• Low reflected ripple on input power line
• Rack-mountable
• Commonly used with electron probes and similar applications

I didn't find what I need

Call us and let our knowledgeable staff help you find exactly what you need.

Need a custom solution? You've come to the right place! CPS has been designing and manufacturing custom high voltage equipment for 30+ years.