Model 130NF/1314 — Single output high voltage power supply with floating ground

• Single output 0 to 30 kV
• Uses only 500 μA at max voltage
• AC input
• Ripple under 200 mV at full load
• Arc- and short-proofed
• Local/remote programming
• HV output cable included
• Floating grounding wire

Model BP2595 — Bipolar HV power supply, USB

• Wide, bipolar voltage range: -50 kV to +50 kV
• Very low ripple
• Front panel displays setpoint, status and meters
• Local control via front panel
• Remote control via USB
• Thread-safe API supports event-driven apps

Model 2591 — Single output high voltage power supply

• Single output +0.01 to +30 kV
• Output ripple under 200 mV p–p at 500 μA
• Temperature coefficient under 25 ppm/°C
• Stored energy under 1 J
• Low reflected ripple on input power line
• Separate connections for HV output, cable shield, and programming reference
• Compact enclosure: 6.0 × 2.1 × 3.7 in.
• Commonly used in focused ion beam systems

Model 2591P — Single output unipolar programmable high voltage power supply

• Up to 30 kV positive or negative output
• Up to 500 μA of output current (1 mA option available)
• Extremely low output noise and ripple: under 200 mV p–p at 50 μA (low ripple with higher current available as an option)
• Differential programming input
• Separate case ground, control common, and high voltage return
• Outstanding output voltage stability (under 10 ppm/hr) and temperature coefficient (under 10 ppm/°C)
• Very good load and line regulation (0.001%)
• Outstanding slew rate (over 35 V/ms) without voltage oscillations
• Compact enclosure: 6.0 × 2.1 × 3.7 in.
• Convenient DB9 connectors for low voltage signal
• Shielded HV Caton connector
• Arc and short protected; overcurrent limited
• Commonly used for E-beam and ion beam applications

Model 2592 — Single output unipolar high voltage power supply

• Single output 0.01 to +50 kV or −0.01 to −50 kV
• Low ripple
• Wide output voltage range
• Low temperature coefficient
• Low stored energy
• Excellent stability
• Separate ground for case, signal, and power
• Low temperature coefficient: under 25 ppm/°C
• UL listed and CE marked at −40 kV, 100 μA
• Common applications include ion beam systems

Model 2596 — Quad unipolar output precision high voltage power supply

• Up to 30 kV positive or negative outputs
• Up to 200 μA (200–1000 μA options available upon request)
• Output noise and ripple under 200 mV p–p at full load for each output
• Independent programming, voltage, and current metering
• Output voltage stability under 10 ppm/hr
• Temperature coefficient under 10 ppm/°C
• Excellent load and line regulation (0.001%)
• Outstanding slew rate (over 35 V/ms) without voltage overshoots
• Standard 19″ rack enclosure
• Shielded high voltage CPS output connectors
• Arc and short protected, overcurrent and overvoltage limited
• AC line voltage input

Model 2600 — Single output, ultra low noise/stored energy high voltage power supply

• Single output 0 to +50 kV or 0 to −50 kV
• Only @ 500 μA at maximum voltage
• 24V to 28V DC input
• Input for remote interlock switch
• Input for remote HV enable
• Power for remote VOLTAGE ON display lamp
• Remote control via USB or RS-232 comm
• Free user interface control and display program

Model 3603 — Triple output high voltage power supply

• Three outputs: −30 kV 330 μA, floating −1 kV 25 μA and 5 VDC 3 A
• Compact enclosure
• Interlock input and status LEDs
• Federal Standard output connector
• RS-232 remote control
• Demo software with source code
• Ideal for electron microscopes and similar applications

I didn't find what I need

Call us and let our knowledgeable staff help you find exactly what you need.

Need a custom solution? You've come to the right place! CPS has been designing and manufacturing custom high voltage equipment for 30+ years.