Model 130N — Single output high voltage power supply with case ground

• Single output 0 to 30 kV
• Uses only 500 μA at max voltage
• AC input
• Ripple under 200 mV at full load
• Arc- and short-proofed
• Local/remote programming
• HV output cable included
• Case ground
• Built-in metering

Model 1210 — Single output high voltage power supply

• Output ripple under 150 mV at full load
• Temperature coefficient under 15 ppm/°C
• Low stored energy (under 1 J)
• Low reflected ripple on input power line
• Separate connections for HV output cable shield and programming reference
• Very compact case size

Model 1561/4009 — Single output high voltage power supply

• High stability
• Excellent line and load regulation
• Short circuit and arc protection
• Current-limited output
• Compact size

Model 1641/4008 — Double output high voltage power supply

• 10 kV anode output
• G2 output
• Static and dynamic focus output
• Arc proof and short proof

Model 1834 — Five output high voltage power supply

• Five outputs: 12 kV anode, 5 kV focus, −70 V G1, 825 V G2, and 10 V dynamic focus
• Low line and load regulation of high voltage outputs
• All outputs short circuit and arc protected, arc and short recovery tested
• Remotely programmed shutdown for each output
• Each output current-limited
• Focus ripple under 2 V peak-to-peak due to anode transients
• Very good cross regulation
• Very low cross talk ripple

Model 1844 — Five output four-level dynamic high voltage voltage switching power supply

• Replacement for Venus Scientific beam penetration power supply
• DESC B54E0051-2 part number
• Rapid switching between 8 kV and 17 kV
• Used in flight simulators

Model 1848 — Five output five-level dynamic high voltage voltage switching power supply

• Replacement for Venus Scientific 271 beam penetration power supply
• DESC B54E0051-2 part number
• Rapid switching between 6 kV and 14 kV
• Used in FAA operator displays and flight simulators

Model 1953 — Five output high voltage power supply

• Five outputs: anode, focus, G1, G2, and dynamic focus
• Low line and load regulation of high voltage outputs
• All outputs short circuit and arc protected, arc and short recovery tested
• Remotely programmed shutdown for each output
• Each output is current- and voltage-limited
• Very good cross regulation
• Low crosstalk ripple
• Low temperature coefficient

Model 1966A — Five output high voltage power supply with accelerating focus

• Five high voltage outputs
• Decelerating focus voltage
• Floating filament supply
• Extremely low ripple and outstanding stability
• Low line and load regulation of high voltage outputs
• All outputs short circuit and arc protected
• Computer controlled via parallel digital differential interface
• Each high voltage output current and voltage limited
• Very good cross regulation
• Very low crosstalk ripple
• Very low temperature coefficient
• Standard 19-inch rack mounted chassis: 19" × 22.5" × 10.5"
• Common applications include electron-beam lithography

Model 1966D — Five output high voltage power supply with decelerating focus

• Five high voltage outputs
• Accelerating focus voltage
• Floating filament supply
• Extremely low ripple and outstanding stability
• Low line and load regulation of high voltage outputs
• All outputs short circuit and arc protected
• Computer controlled via parallel digital differential interface
• Each high voltage output current and voltage limited
• Very good cross regulation
• Very low crosstalk ripple
• Very low temperature coefficient
• Standard 19-inch rack mounted chassis: 19" × 22.5" × 10.5"
• Common applications include electron-beam lithography

Model 2091A — Single output unipolar electrostatic high voltage power supply

• Compact size
• Reliable solid-state design
• Automatic overcurrent shutdown and recovery
• Totally encapsulated
• Maintenance free

Model 2091B — Single output unipolar electrostatic high voltage power supply

• Compact size
• Reliable solid-state design
• Automatic overcurrent shutdown and recovery
• Totally encapsulated
• Maintenance free

Model 2581 — Single output high voltage power supply

• Output ripple under 300 mV p–p at full load (50 kV, 500 μA)
• Soft-start circuit
• Stored energy under 500 mJ
• Arc and short circuit protected
• Restarts after arc or short circuit
• Overvoltage protection
• Undervoltage lockout
• Common applications include electron and ion beams

Model 2592-10 — Single output unipolar high voltage power supply

• 10 kV anode output
• Low ripple
• Low temperature coefficient
• Low stored energy
• Wide output voltage range
• Excellent stability
• Separate ground for case, signal, and power
• Common applications include ion beam systems

Model 6001 — Double output high voltage power supply

• Very stable −30 kV electron beam supply
• Arc and short circuit protection
• 5 A integrated filament supply floating at beam potential
• Remote programming of beam voltage
• Beam voltage, beam current, and filament current readouts
• Optimized for SEM and X-ray tube applications

Model 6004 — Double output high voltage power supply

• Very stable −30 kV electron beam supply
• Arc and short circuit protection
• 5 A integrated filament supply floating at beam potential
• Remote programming of beam voltage
• Beam voltage, beam current, and filament current readouts
• Optimized for SEM and X-ray tube applications

I didn't find what I need

Call us and let our knowledgeable staff help you find exactly what you need.

Need a custom solution? You've come to the right place! CPS has been designing and manufacturing custom high voltage equipment for 30+ years.